Pressure Swing Adsorption (PSA)
Pressure Swing Adsorption (PSA) Nitrogen Generator Malaysia, Selangor, Kuala Lumpur (KL), Subang Jaya Manufacturer, Supplier, Supply, Supplies | Nitroxygen Gases Sdn Bhd
Nitrogen Generator: Pressure Swing Adsorption (PSA)
Nitrogen PSA offer cost-effective, reliable and safe alternative nitrogen gas supply by producing nitrogen gas from compressed air. The technology behind it are the two columns filled with carbon molecular sieve (CMS). Pre-treated compressed air flows through the CMS. Throughout the process, other gases are being filtered, leaving only nitrogen gases to passes through. The column are separate into active & inactive state. The active column is in pressurized state but when the pressure is released, the column become inactive and completely regenerate while the other column become active. At the end of cycle they switch roles.

Our nitrogen generator comes in standard models that comes with user-friendly touchscreen control. It is design to provide continuous supply of nitrogen gas 24/7 with customizable amount of purity based on customer’s requirements. Here are some of the technical specification below:

01 Nitrogen Purity 95% - 99.999%
     Flowrate 5-1500 Nm3/h
     Pressure 5-8 barg
     (*Higher pressure via booster)

02 Compact Design

03 Can be packaged with
  • Air Compressor
  • Dryer
  • Air Receiver
  • Nitrogen Tank
  • Booster
04 Quick Start Up

05 Standby mode for energy conservation

Suitable for:
01 Edible Oil
02 Oleochemicals
03 Food Packaging
04 Tank Blanketing
05 Chemicals
06 Petrochemicals

Peace of Mind
Reduce operating cost typically by 20% - 80%
Fast payback, usually below 2 years
Low maintenance
Prompt After Sales Service & Service Contract
Equipment Specialist
Free Gas Consultation for Regular Clientele
We use the optimized grade of CMS [Carbon Molecular Sieve] which is a special type of AC [Activated Carbon]

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version